![](/static/66c60d9f/assets/icons/icon-96x96.png)
![](https://lemmy.world/pictrs/image/8286e071-7449-4413-a084-1eb5242e2cf4.png)
Using a VPN (like Tailscale or Netbird) will make setup very easy, but probably a bit slower, because they probably connect through the VPN service’s infrastructure.
My recommended approach would be to use a directly connected VPN, like OpenVPN, that just has two nodes on it – your VPS, and your home server. This will bypass the potentially slow infrastructure of a commercial VPN service. Then, use iptables rules to have the VPS forward the relevant connections (TCP port 80/443 for the web apps, TCP/UDP port 25565 for Minecraft, etc.) to the home server’s OpenVPN IP address.
My second recommended approach would be to use a program like openbsd-inetd on your VPS to forward all relevant connections to your real IP address. Then, open those ports on your home connection, but only for the VPS’s IP address. If some random person tries to portscan you, they will see closed ports.
The good news is: the error shown there was a PCIe bus error, which means the error is somewhere between the NVME controller and your processor’s PCIe interface. Also good news: the errors you experienced were fully corrected, so you probably lost no data.
So the flash memory in the drive isn’t failing. That’s good because if the flash memory starts failing, it’s probably only going to fail more. In this case, your errors may be correctable: by replacing the motherboard, by replacing the processor, by reseating the NVME drive in its slot, by verifying that your power supply is reliable…
However, if your NVME controller actually does fail, it will be little consolation to tell you that your data is all still there on the flash chips, but with no way to get it. So now might be a good time to make a backup. Any time is a good time to make a backup, but now is an especially good time.
If you keep getting these errors at the same rate, then you probably don’t need to do anything, since the errors are being corrected. If you’re worried, you could use BTRFS and enable checksumming of data.