This happens when a small project has 12 developers each scratching their own itch in their own time, not a team of 120 developers getting paid to work on the same itch 8 hours a day.

In the case of FreeCAD they’re actually starting to reign in and focus more now, and there are more contributors.

You might want to look up SMR vs CMR, and why it matters for NASes. The gist is that cheaper drives are SMR, which work fine mostly, but can time out during certain operations, like a ZFS rebuild after a drive failure.

Sorry don’t remember the details, just the conclusion that’s it’s safer to stay away from SMR for any kind of software RAID

EDIT: also, there was the SMR scandal a few years ago where WD quietly changed their bigger volume WD Red (“NAS”) drives to SMR without mentioning it anywhere in the speccs. Obviously a lot of people were not happy to find that their “NAS” branded hard drives were made with a technology that was not suitable for NAS workload. From memory i think it was discovered when someone investigated why their ZFS rebuild kept failing on their new drive.

Another option is subpaths: xyz.ddns.net/portainer

Just one open port, to your reverse proxy (nginx or other).

The client updating no-ip with your dynamic IP is independent of the reverse proxy software.

This sounds like a FOSS utopian future :)

There’s a few projects that have started towards this path with single-click deployable apps, you could even say HomeAssistant OS does this to some extent my managing the services for you.

I believe one of the biggest hurdle for a “self hosting appliance” is resilience to hardware failure. Noone wants to loose decades of family photos or legal documents due to a SSD going bad , or the cat spilling water on their “hosting box”. So automated reliable off-site backups and recovery procedures for both data and configs is key.

Databox from BBC / Nottingham University is also a very interesting concept worth looking in to:

A platform for managing secure access to data and enabling authorised third parties to provide the owner authenticated control and accountability.

Probably more what MangoKangoroo and B0rax talked about, that enterprises can opt out of this telemetry, due to compliance or Intellectual Property protection.

So only the commoners get mandatory full-scale surveillance, Ehm I mean “ai enhancement”

I third Proxmix

I run most stuff as Docker images inside a VM, but also a few services as LXC containers and some non-docker stuff in other VMs

How much of this is Spotify’s fault and how much is the major record labels sitting between Spotify and the individual artists?

And is there a better place for us consumers to go and vote with our wallet? Ideally somewhere that isn’t one of the 5 major tech giants that control everything

That’s very strange, which distro and GPU was this? So I don’t recommend that to anyone?

I’m assuming the GPU in question was Nvidia, since AMD and Intel make their driver opensource and baked in to the kernel. Sadly nVidias latest kernel (535) has been troublesome, so I’m still on the previous 525. nVidia is about to release 545, which looks to be very promising.

Luckily on Ubuntu changing driver is as easy as opening the Additional Drivers application, selecting the driver version, hit apply and reboot. PopOS, Bazzite, and a few others comes with Nvidia drivers preinstalled.

Best of luck if you try again in the future

Like others said it’s mostly just practice.

What helps is to align the (short) ends and hold them flat between your index finger and thumb. Use your free hand to get them in order. Once they’re in order, keep holding them still between your index finger and thumb using one hand, then use your free hand to slot on the connector

Edit: also bending them back and forth a bit will soften them up and reduce them curling in all sorts of directions. It also weakens them, so don’t overdo it (mostly only works for solid cable, the type meant for permanent installations like inside walls)

What’s the deal with the timezone?

Wow that’s awesome! Props to etnoy for creating such a polished PR for this feature

I can’t wait to simply point immich at my existing photo structure :)

For RPi the two major causes of issues (in my experience) are low spec power supplies and low spec SD-cards.

Power supplies drop voltage when the loads gets too high, which is especially pronounced with high power USB devices like external harddrives.

SD-cards tend to get worn out or give write errors after enough writes. Class 10 SD cards are recommended for both speed and longevity. And ideally try to avoid write intensive stuff on the SD card

“On a DVD”… 😅 in some decades that might as well be like saving your video to 8mm film. Gotta call some specialist antique dealer on the other side of the continent to find the right tech and right adapters to play it back on modern hardware

Thirding a reverse proxy. Probably Nginx Proxy Manager (NPM) is the easiest reverse proxy to get started with, if you don’t want to deal with plain nginx config files

It’s also available as a standalone desktop application, which work perfectly even when you’re offline

Yes! I can not recommend draw.io aka diagrams.net enough! (I still don’t understand why it has two names and which name is the current “correct” one)

It works both in the browser, or as a downloadable standalone application that works 100% offline.

My favourite feature is exporting PNG or PDF with the complete diagram XML embedded as metadata, which means they can be opened and edited again by draw.io

It’s very useful not only for networking, but all sorts of diagramming needs

Thanks for sharing, I have 3 hm90s I’m about to set up ( just waiting for RAM and SSDs ), these crashes sound super frustrating.

I was planning to run them detuned anyway to reduce the strain and temperature on the Power Supply, since its a non-standard USB-C which looks hard or impossible to replace if it breaks some years from now

I agree after seeing the patent , there’s nothing groundbreaking or novel there.

Replace video for audio then there’s already prior art for both control and synchronization with Sonos (2005). And a plethora of Winamp web interface plugins.

For video there was already the XMBC web interface. Sure there was no “app”, but the patent is vague enough that the web-browser on the smartphone accessing the web interface can be considered the app

After looking at the patent it’s clear it’s way too vague, generic and obvious. It should never have been granted. (I Am Not A patent Lawyer). For one the XMBC web interface from 2009ish is prior art.

Technically the Kodi remote control app would be in violation of the patent, except it doesn’t use any “back end server system”.

If you replace the words “display” and “video” with “speaker” and “audio” then the Spotify app would be in violation as well, as it allows changing the playback device to any of your logged in devices.

Come to think of it, if you use Firefox on mobile to access YouTube, then “send tab to other device”, and send it to a desktop computer connected to a big screen, it could be interpreted as violating the patent as it’s using Mozilla’s “back end server” to relay the message

Depends on what exactly was covered in the patent. The article only says

invented technology in 2010 to “move” videos from a small device like a smartphone to a larger device like a television.

Which is vague and an obvious bogus patent. Prior art exists in both the digital and analogue space