Before it got enshittified with an update a few years ago, I used the RealVNC Android app to connect to a few of my own VNC servers. Wasn’t interested in any of the fancy features, I just wanted a good VNC app.

Now I use AVNC. It’s solid, performs better than RealVNC used to, and it’s open source! You can get it on FDroid.

It should still work!

I only go back and make changes to LED if something breaks with a major Lemmy update, but Lemmy hasn’t had a major update since January. Lemmy v0.19.4 isn’t released yet, but when it is, I’ll make sure the deployment is up to date.

Note that it does not have any advanced features that a major instance might want, such as storing images on S3, exporting data, or image moderation. If you intend for your instance to grow for 100+ users, this isn’t for you. This is only intended for beginners who are overwhelmed by the other Lemmy hosting options, and want an easy way to host a small single-user or small-user instance.

I can’t believe OP is actually forklift certified

I’m scratching my head to think what Vultr could do better in this case

There was substantial room for improvement in the way they spoke publicly about this issue. See my comment above.

I still don’t like how flippant they’ve been in every public communication. I read the ToS. It’s short for a ToS, everyone should read it. They claim it was taken “out of context,” but there wasn’t much context to take it out of. The ToS didn’t make this distinction they’re claiming, there was no separation of Vultr forum data from cloud service data. It was just a bad, poorly written ToS, plain and simple.

They haven’t taken an ounce of responsibility for that, and have instead placed the blame on “a Reddit post” (when this was being discussed in way more detail on other tech forums, Vultr even chimed in on LowEndTalk).

As for this:

Section 12.1(a) of our ToS, which was added in 2021, ends with “for purposes of providing the Services to you.” This is intended to make it clear that any rights referenced are solely for the purposes of providing the Services to you.

This means nothing. A simple “we are enhancing your user experience by mining your data and giving you a better quality service” would have covered them on this.

We only got an explanation behind the ToS ransom dialog after their CMO whined in a CRN article. That information should have been right in the dialog on the website.

In both places, they’ve actively done vague things to cause confusion, and are offended when people interpret it incorrectly.

I don’t think they were disagreeing with you, I think they were just trying to say:

You shouldn’t need braces to be vertically aligned if your code is uniformly indented. Then you can easily see what code is paired together just by their indentation level.

Of course this is not always true if you’ve got a bunch of crazy nested indentation pushing things off to the right.

You are giving it the -d flag. -d means “detached.” There are logs, you are just preventing yourself from seeing them.

Replace the -d with an -i (for interactive) and try again.

Have you completed the podman rootless setup in order to be able to use it? You may need to edit /etc/subuid and /etc/subgid to get containers to run:

https://github.com/containers/podman/blob/main/docs/tutorials/rootless_tutorial.md#etcsubuid-and-etcsubgid-configuration

More than likely, this might have something to do with podman being unprivileged, and this wanting to bind to port 80 in the container (a privileged port). You may need to specify a --userns flag to podman.

Running in interactive mode will give you the logs you want and will hopefully point you in the right direction.

Hi :)

If you’re already running an instance, you’re not going to have a good time of this on the same server unfortunately. The webserver config I ship assumes a single instance, and all of the handling assumes only one domain. You would have to basically modify my entire script to support something like this.

You can take a look at my advanced configuration page to figure out what files you can edit, but this would be a very manual process for what you want to do.

Apologies, but you would be better off deploying a new server.

I don’t have the same issue. Fennec from F-Droid runs at 120Hz even with tabs open

The indicator does flicker between 60 and 120 while the page is loading, but it’s not perceptible. However, if what I’m seeing means the FPS goes down to 60 while the app is busy, this may be some kind of performance throttling done to keep resource usage low. If you have lower end specs, this may be the explanation. I’m on a Pixel 6 Pro.

In this case, it sure does sound like abuse. Considering the careful wording, combined with the seemingly kneejerk reaction of requiring authentication, there was likely illegal activity going on:

Earlier this year we saw an increase in the number of reports we received about some people using our service in ways that we cannot tolerate. To be more clear, this was not about some people merely saying things that others disliked.

Over the past several months we tried multiple strategies in order to end the violations of our terms of service. However in the end, we determined that requiring authentication was a necessary step to continue operating meet.jit.si.

It was a free, anonymous service that let people stream video and send messages. Consider for a moment if that “video” was actually non-video data encoded to be streamed through Jitsi and sent to another location. Or, consider if the video was video, but was so egregious and illegal, that Jitsi had to take action. It doesn’t take a lot of thinking to consider the kinds of activities could have been going on.

Why is everyone up in arms about this? The abuse of their free service was rampant. This isn’t a core project change, this is just a measure to keep a version of the project up for free without completely taking it down. They don’t even have a way to monetize this. An alternative was to simply shut it down and only allow you to self host it.

I self host my Jitsi instance, but as a privacy nut, I don’t see a problem with this. Absolute privacy cannot always coexist with free anonymous services. Don’t blame Jitsi, blame the people who ruined it for everyone else.

ChickenThoughts is one of the things I miss from Reddit :(

It’s really hard to take calls to action like this seriously, when they unironically talk like this:

You cannot pass this invasive “browser check” without enabling JavaScript. This is a waste of five(or more) seconds of your valuable life.

Most of the other points are either grasping, misleading, or make the classic FOSS-centric assumption that we live in a fantasy land where all hosting is free and companies don’t need to exist.

I’m not out here trying to say Cloudflare is vital to society, but come on, these arguments are toothless.

I’ve seen people have similar issues on my issue tracker. Turns out it was caused by Cloudflare’s JS minimization or rocket-loader being enabled. Something changed in 0.18.3 that made it incompatible with those Cloudflare features. If you use the Cloudflare proxy to serve your site, you will need to turn those off.

Aw, thanks! :D

You’re welcome!

If you’re not already, I recommend trying to host this on a cloud VPS service, such as Vultr, Linode, or DigitalOcean. This would give you a reliable, always online Lemmy instance, which means you won’t miss any federation data. Even a cheap $5 VPS instance would be enough to get you started, though a $10 would give you more breathing room.

If you’re hosting at home, it’s generally not a good idea to do that, especially for an application like Lemmy. Most consumer grade network equipment at home might not be equipped to deal with the unrelenting 24/7 flood of data coming in due to federation. And if your power or internet ever goes out, you will be missing any comments, posts, or votes that were sent out during your downtime.

Hey there, please note that running behind a reverse proxy is not supported. You can do it if you want, but you are kinda on your own, sorry.

If it helps, you will probably need to disable Caddy’s TLS in the config, and you will need to make sure that the request reaches Caddy via the correct host. You can’t reverse proxy directly to port 80 over an IP, it needs to think it’s coming from an actual domain.

You can also check out my advanced configuration page to learn how to override the Caddyfile template and roll your own config that is more compatible for your use case.

Good luck!

Reminds me of the trans affirming misogynist parrot

Their cheapest $5 Linux VPS isn’t any better than one from a reputable host like Vultr. This isn’t really a deal, just use a trusted hoster instead.

I plan to support this for as long as I’m using Lemmy, which should be a good while.

All the script really does is generate a docker-compose.yml stack that’s best for your desired setup. So even if I do stop supporting the script, you’re not locked into using it. You can always manage the Docker Compose stack manually and do your own updates, which is what people not using my script will have to do anyway.

Also, I don’t bake Lemmy versions directly into this script, I just pull the latest Lemmy version from GitHub and deploy that. So in theory, unless the Lemmy team changes something major, this should continue working for a long time after I stop supporting it.

If you want to be prepared, I would recommend reading up on Docker Compose and getting familiar with it!